No-Wrench Screw Anchors may be installed by
hand or machine. The THIMBLEYE eye or TRIPLEYE eye on the rod has a large opening to admit a turning
bar for screwing the anchor down. The eye will also
fit into an adapter available from most hole-boring
machine manufacturers so the anchor may be powerinstalled. The No-Wrench Screw Anchor consists of a
drop-forged steel THIMBLEYE eye or TRIPLEYE eye
rod welded to a steel helix. The entire anchor is hot-dip
galvanized for long resistance to rust.
No-Wrench Screw Anchors can be installed to a greater
depth to reach a firmer soil by using an extension rod.
Maximum installing torque is 2300 ft.-lbs. for 1-1⁄4″
diameter rod.
EMP is a professional manufacturer of no wrench screw anchor in China.
- Available sizes:
- 3/4″(Rod Dia)x54”(rod Length) with 4” Helix.
- 3/4″(Rod Dia)x66”(rod Length) with 6” Helix.
- 1″(Rod Dia)x66”(rod Length) with 8” Helix.
- 1-1/4″(Rod Dia)x66”(rod Length) with 10” Helix.
- 1-1/4″(Rod Dia)x96”(rod Length) with 10” Helix.
