Reinforcing plate prevents damage to the Crossarm from tightened nuts. The design has a pressed rib and is normally used on the side of the crossarm. It is used on top or bottom of flat top crossarms to reduce the strain from forged
Vibration Dampers are used to absorb Aeolian Vibrations of conductors of Transmission Lines, as well as ground wire, OPGW, and ADSS. It is mostly composed of the following; Weights–made up of cast iron, Clamp–made up of Aluminum Alloy, Nuts and Bolts
A double arming bolt is another simple but vital overhead powerline accessory that you will need. It is mainly used for providing support during the cross arm construction process.In case you want to install two cross arms onto the pole line, you will
The pole top bracket is installed against flat pole gains. It is designed to mount post type insulators by means of a single stud bolt. Mounting surfaces of brackets contain a non-tap hole to be mounted on these pole top brackets. The pole
The stay rod is also named stay set, it is an important part in the usage of pole line hardware. It is a component used to connect the stay wire to the ground anchor. There are two types: bow stay rod and tubular
Secondary rack is a type of insulator cable support with a steel U channel at the base which is connected with the utility pole by nuts and bolts. The secondary rack can be customized to fit different amounts of conductors. It is wildly used in
The secondary clevis comes with strict quality control and is punched with clevis pin and flat steel that strings the pool insulator. The secondary clevis, also known as the dead end clevis, is a D shaped iron D bracket. The electrical
No-Wrench Screw Anchor is also called Earth Helical Screw Anchor, it is a type of earth anchor, that functions by guying wires or cables within utility poles. It includes an anchor rod of forged-eye, angle-cut tip and a welded helix. Both the Triple eye
The main purpose of Guy Strain is providing electrical separation from the pole to the guy wire. The strain insulators act as lighting rod electrocuting protectors. Generally, they insulate the lower portion of the guy from the upper end. Usually it is made
QINGDAO EASTWARD MECHANICAL PRODUCTS CO.,LTD
