In the hot forging process, the metal is plastically deformed at a specific temperature, and then a predetermined strain rate occurs, allowing the recrystallization process to proceed simultaneously with the deformation, thus avoiding strain hardening. In order to achieve this process,
Expanding Anchor for 6" (152 mm) Hole used with 0.625" (15.9 mm) Diameter Rod.The Chance “Bust” Expanding Anchor expands to take full advantage of the available hole size. All eight blades wedge into undisturbed earth, there is no wasted space between
Forgings made from one of the four grades of steel are called carbon steel forgings. Carbon steel is simply steel with varying amounts of carbon added to the steel. Low carbon steels contain between 0.05 and 0.25% carbon, while medium carbon
Sidewalk Guy Pole Plate fittings are used with standard pipe near sidewalks and buildings where there is insufficient space for standard guying and where head clearance must be maintained. SpecificationsApplication:Guy to Single Pole/BuildingMounting Style:Thru-Bolt and Lag Screw Material:Ductile IronFinishing:Hot Dip Galvanized Lb/Ea:2.25
What is drop forging? Simply put, it is a manufacturing method that uses two dies, one on a fixed anvil base and the other attached to a moving press.The heated metal is placed on the lower die, punch presses the other
Corrosion-Resistant Anchor .375" (9.5 mm) Thick for 30" (762 mm) Hole used with 1.25" (31.75 mm) Diameter Rod.The Chance corrosion protected Disc Anchor is designed for low resistivity, alkaline and acidic soils with electrolyte combinations. Forged eye anchor rods (order separately)
Manufacturing processes are incredibly complex, combining sophisticated methods to produce parts and finished products that many of us may take for granted. Die forging (also known as "closed die forging") is one of many forging techniques, but it has a wide
Both hot and cold forged products are stronger than metal castings. Forged parts have more predictable strength and integrity and typically exhibit more uniform and superior physical properties than castings.During the forging process, internal metal defects that may occur in the
Aluminum in its elemental form is a fairly soft and lightweight metal that is often alloyed with copper, magnesium, tin or zinc to increase its strength, durability, quality and workability. Approximately 85% of aluminum parts are made from forging. Aluminum alloys
Attaches to hooks and span clamps to secure ends of 1-2 Pair communications service drops. Industry slang is P Clamp.Body and serrated shim are 5052-H23 aluminumWire bail is 430 stainlessRated for 555 lbs. per Telcordia specificaton GR-3174Packaged as 2 clamps per
QINGDAO EASTWARD MECHANICAL PRODUCTS CO.,LTD
