The parallel groove clamp is designed to connect two conductors in parallel and especially used to hold transmission conductors in parallel in transmission lines. Usually, it’s made up of high-strength aluminium alloy bolts and the parallel groove clamps to maintain high contact pressure during cooling
Guy thimble is also called cable thimble which is used on pole band to work as an interface fitting to connect the guy grip or guy wire. The guy thimble is widely used on the electric power line or dead-end pole
The Bird Flight Diverter(BFD) is designed to make overhead lines and guyed structures visible to birds and provides an economical means of reducing the hazard to both lines and birds. For low- and medium-voltage construction, the BFD is applied to the phase conductors
EMP is a professional manufacturer of accessories using on pole line. At the meantime, we have many own design that have good application feedback. Welcome to contact us to learn more details.A ground rod clamp is an underground electrical fitting that
Banding buckles are hardware products used to secure ends together for storage or transportation of an item. Usually, they are referred to as stainless steel banding clips.The two primary applications of steel strapping and banding tools are hose clamping and load
The electrical cross arm is also called power pole cross arms, utility pole cross arms, telephone pole cross arms or light pole cross arms. In different application setups, there are different configurations for the electrical cross arms. For instance, power pole cross arms
A U-bolt is a round bar in the shape of the letter U with a metric screw thread at both ends.U-bolts have primarily been used to support pipework through which fluids and gasses pass. As such, U-bolts are traditionally measured using pipe-work engineering speak, i.e. nominal
Cross Plate anchors provide sturdy stability and support to a variety of natural and man-made outdoor constructions. It’s made for installation in holes drilled by power diggers. Because the size of the hole does not affect holding capacity, the hole can
The guard arm brace is a type of brace mounted to the electrical cross arm. It is most commonly used in communications applications where messenger stand is attached to the arm on the side opposite the brace. The guard arm brace
In industry, it’s also called alley-arm brace. It’s one complex type of steel cross arm, a diagonal steel brace used to provide stability and strength to crossarms that are installed in an offset application. The side-arm is widely used on overhead
QINGDAO EASTWARD MECHANICAL PRODUCTS CO.,LTD
